Products
- Home
- Products
- Conductivity Meter
- 7714
7714
内容说明
Conductivity Measure Unit Specification
|
Model |
7714 |
|
Measurement range |
0~4μS/cm (0~0.4mS/m) 0~20μS/cm (0~2mS/m) 0~400μS/cm (0~40mS/m) (Automatic temperature compensation at 25℃) Cell constant: 0.1cm-2(10m-2) |
|
Sensor input |
1 piece |
|
Water temperature |
0~100℃ |
|
Temperature compensation |
0~100℃ |
|
Accuracy |
Repeatability±1.0% Full Scale |
|
Analog output |
4-20mA DC(resistance load less than 400Ω) Conductivity and temperature outputs (Ground is common connection) |
|
Operating condition |
Ambient temperature 0~40℃ Ambient humidity 5~80% (There should be no dew condensation.) |
|
Power supply |
DC 24V±10% (exterior supply) *External power supply and internal circuit are insulated electrically. |
|
Power consumption |
MAX 3W (Lower than DC24V/125mA) |
|
Display |
Not available |
|
Dimensions |
W45xH70xD109 mm (35mmDIN rail install type) |
|
Usable sensor |
R3/4 type *7701-S300 *7701-S310 *7701-S600 R1/2 type *7701-S400 *7701-S500 |
|
Others |
It is possible to extend the cable up to a maximum 20 meters. Use the cable specified by Techno Morioka. |
