Products
- Home
- Products
- Conductivity Meter
- 7721
内容说明
Resistivity Measure Specification
Model |
7721 |
Measurement range |
0~20.00MΩ‧cm (0~200.0KΩ‧m) (Automatic temperature compensation at 25℃) Cell constant: 0.1cm-1(10m-1) |
Sensor input |
MAX 2 pieces |
Water temperature |
0~100℃ |
Temperature compensation |
0~100℃ |
Reject ratio |
Reject ratio= [1-R1/R2] X 100 [%] R1 and R2 are resistivity, and R1 < R2 |
Accuracy |
Repeatability±1.0% Full Scale |
Alarm output |
Two relay outputs (Low or High mode) Contact capacity at resistance load Less than AC125V 0.4A, or less than DC30V 2A |
Analog output |
4-20mA DC(resistance load less than 500Ω) Two analog outputs (Ground is common connection) One selected among the conductivity, temperature, and reject ratio. |
Communication |
One RS-485 port (2 wire type) Termination resistor is not built in. |
Operating condition |
Ambient temperature 0~50℃ Ambient humidity 5~80% (There should be no dew condensation.) |
Power supply |
AC TYPE: 85~264VAC 47~440Hz DC TYPE: 18~36VDC |
Power consumption |
MAX 8.5W |
Dimensions |
W96xH96xD164 mm |
Usable sensor |
R3/4 type *7701-S300 *7701-S310 *7701-S600 R1/2 type *7701-S400 *7701-S500 |